• lqdrchrd@lemmy.blahaj.zone
    link
    fedilink
    arrow-up
    266
    arrow-down
    1
    ·
    6 months ago

    Size of an uncompressed image of the Washington Crossing the Delaware painting = 1 Yankee

    12 Yankees in a Doodle

    60 Doodles in an Ounce (entirely unrelated to the volume or weight usage of ounce)

  • cmnybo@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    158
    ·
    6 months ago

    How about feet of IBM punch cards?

    A 1 foot tall stack holds 1,647,360 bits of data if all 80 columns are used. If only 72 columns are used for data then it’s 1,482,624 bits of data and the remaining columns can be used to number each card so they can be put back in order after the stack is dropped.

    • YodaDaCoda@aussie.zone
      link
      fedilink
      English
      arrow-up
      41
      arrow-down
      1
      ·
      6 months ago

      I like this because the amount of bits in a stack can vary depending on whose foot you use to measure, or the thickness of the card stock.

      • grozzle@lemm.ee
        link
        fedilink
        arrow-up
        13
        ·
        6 months ago

        IBM standard cards are one 48th of a barleycorn thick. I believe IBM measured from the 1932 Iowa Reference Barleycorn, now kept in the vault inside Mt Rushmore.

  • Rinox@feddit.it
    link
    fedilink
    arrow-up
    85
    arrow-down
    1
    ·
    6 months ago

    bit, Nibble, Byte, Word, doubleword, longword, quadword, double-quadword, verylongword, halfword

    They check all Imperial criteria:

    • confusing names
    • some used only in some systems
    • size depends on where you are
    • some may overlap
    • doesn’t manage to cover all the possible needs, but do you really need more than 64 bits?
    • would probably cause you to crash a rocket
    • uis@lemm.ee
      link
      fedilink
      arrow-up
      3
      ·
      6 months ago

      Words! Of course! Imperial measurement is words. Because they are as inconsistent as other imperial units.

  • solrize@lemmy.world
    link
    fedilink
    arrow-up
    80
    ·
    edit-2
    6 months ago

    1 tweet = 140 bytes

    1 (printed) page = 60 lines of 60 characters = 3600 bytes

    1 moa (minute of audio in 128000 bps mp3) = 960000 bytes

    1 mov (minute of video) = typically around 30MB but varies by resolution and encoding, like ounces vs troy ounces vs apothecary ounces.

    1 loc (library of congress, used for measuring hard drive capacity) = around 10TB depending on jurisdiction.

    • Melmi@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      7
      ·
      6 months ago

      These are all rough averages, of course, but Tweets can be rather bigger than 140 bytes since they’re Unicode, not ASCII. What’s Twitter without emoji?

  • tvbusy@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    52
    arrow-down
    1
    ·
    edit-2
    6 months ago

    I would suggest:

    • 1KB = storage capacity of 1 kg of 1.44 floppy disks.
    • 1MB = storage capacity of 0.0106 mile of CD drives.
    • 1GB = storage capacity of 1 good computer in the 2000s.
    • 1TB = storage capacity of 1 truck of GB (see above)

    PS: just to be clear, I meant CD drives, not CD discs.

  • insomniac_lemon@kbin.social
    link
    fedilink
    arrow-up
    52
    arrow-down
    2
    ·
    edit-2
    6 months ago

    KiB, MiB, GiB etc are more clear. It makes a big difference especially 1TB vs 1TiB.

    The American way would probably be still using the units you listed but still meaning 1024, just to be confusing.

    Either that or maybe something that uses physical measurement of a hard-drive (or CD?) using length. Like that new game is 24.0854 inches of data (maybe it could be 1.467 miles of CD?).

    • Kairos@lemmy.today
      link
      fedilink
      arrow-up
      17
      arrow-down
      1
      ·
      6 months ago

      The difference really needs to be enforced.

      My ram is in GiB but advertised in GB ???

      • xionzui@sh.itjust.works
        link
        fedilink
        arrow-up
        7
        arrow-down
        4
        ·
        6 months ago

        Your RAM is in GiB and GB. You can measure it either way you prefer. If you prefer big numbers, you can say you have 137,438,953,472 bits of RAM

        • Consti@lemmy.world
          link
          fedilink
          arrow-up
          6
          ·
          6 months ago

          Pretty sure the commenter above meant that the their RAM was advertised as X GiB but they only got X GB, substitute X with 4/8/16/your amount

          • xionzui@sh.itjust.works
            link
            fedilink
            arrow-up
            8
            ·
            6 months ago

            As far as I know, RAM only comes in GiB sizes. There is some overhead that reduces the amount you see in the OS though. But that complaint is valid for storage devices if you don’t know the units and expect TB/GB on the box to match the numbers in Windows

  • Leo Uino@lemmy.sdf.org
    link
    fedilink
    arrow-up
    45
    ·
    6 months ago

    Most people would use “word”, “half-word”, “quarter-word” etc, but the Anglophiles insist on “tuppit”, “ternary piece”, “span” and “chunk” (that’s 5 bits, or 12 old bits).

    • joelfromaus@aussie.zone
      link
      fedilink
      English
      arrow-up
      18
      arrow-down
      1
      ·
      6 months ago

      I’ve seen so many products advertised by how many “songs” or “movies” it can hold. Never mind you can encode the same movie to be massive or small. So I think we’ve found the right answer!

  • leaky_shower_thought@feddit.nl
    link
    fedilink
    arrow-up
    32
    arrow-down
    1
    ·
    6 months ago

    why go for RAMs when the constitution says ARMs…

    and no more bits or bytes too, double bytes small or quadbytes regular size all the way.

    • kilo bytes is a grand

    • mega bytes is a venti

    • giga bytes is a grand venti

    • terabytes is a doble venti

    really large amounts of ARM is a ton

    • uis@lemm.ee
      link
      fedilink
      arrow-up
      1
      ·
      6 months ago

      why go for RAMs when the constitution says ARMs…

      x86 is heresy

  • prime_number_314159@lemmy.world
    link
    fedilink
    arrow-up
    31
    arrow-down
    1
    ·
    6 months ago

    From smallest to biggest:

    Bits (basic unit)

    Bytes (8:1 reduction)

    Words (4:1 reduction)

    KiB (32:1 reduction)

    MiB (1024:1)

    GiB (1024:1)

    TiB (1024:1)

    PiB (1024:1)

    A normal amount of porn (237:1)

    • barsoap@lemm.ee
      link
      fedilink
      arrow-up
      14
      ·
      edit-2
      6 months ago

      All definitely not metric as metric uses steps of 1000 (and there’s also 10 and 100 and 1/10th and 1/100th but that doesn’t extend to 10000 and 1/10000th).

      The KiB, MiB, etc, the 2^10 scale is called binary prefixes (as opposed to decimal prefixes KB, MB, etc) and standardised by the IEC.

      And while the B in KiB is always going to mean eight bits it’s not a given that a byte is actually eight bits, network people still use “octet” to disambiguate because back in the days there were plenty of architectures around with other byte sizes. “byte” simply means “smallest number of bits an operation like addition will be done in” in the context of architectures. Then you have word for two bytes, d(ouble)word for four, q(uad)word for eight, o(cto)word for 16, and presumably h(ex)word for 32 it’s already hard to find owords in the wild. Yes it’s off by one of course it’s off by one what do you expect it’s about computers. There’s also nibble for half a byte.

      EDIT: Actually that’s incorrect word is also architecture-dependent, the word/dword/qword sequence applies to architectures (like x86) which went from being 16-bit machines to now being 64 bit while keeping backwards compatibility. E.g. RISC-V uses 32-bit words, 16 bits there are a half-word.

      The bit, at least, is not under contention everyone agrees what it is. Though you can occasionally see people staring in wild disbelief and confusion at statements such as “this information can be stored in ~1.58 bits”. That number is ~ log2 3, that is, the information that fits in one trit. Such as “true, false, maybe”.

      • notfromhere@lemmy.ml
        link
        fedilink
        arrow-up
        3
        ·
        6 months ago

        Great write up, glad to see mention of nibble (my favorite lol)… You forgot to mention byte order (Little/Big Endian).

      • prime_number_314159@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        6 months ago

        So you’re saying my proposed imperial units depend on where you are, and who is using them, for what purpose? That just sells me on them as imperial units even more. :)

        Thank you for the details.

    • uis@lemm.ee
      link
      fedilink
      arrow-up
      1
      arrow-down
      1
      ·
      6 months ago

      Words (4:1 reduction)

      Word is imperial unit. Like one british gallon is not equal to one us gallon, one x86 word is not equal one ARM word.

  • 𝕱𝖎𝖗𝖊𝖜𝖎𝖙𝖈𝖍@lemmy.world
    link
    fedilink
    arrow-up
    29
    arrow-down
    1
    ·
    edit-2
    6 months ago

    12 bits to an eagle

    27 eagles to a liberty (changes whenever an amendment is added)

    1776 liberties to a freedom

    Computers are still programmed in bytes, but filesize is always in freedoms.

  • waz@lemmy.world
    link
    fedilink
    arrow-up
    27
    ·
    6 months ago

    I know you asked about memory, but the computer I just assembled had a 750watt power supply. As an American I think we should refer to it as a “one horsepower power supply” instead.