• AspieEgg@lemmy.blahaj.zone
    link
    fedilink
    arrow-up
    12
    ·
    11 months ago

    They look similar but a VGA port has 15 pins and a serial port has only 9. Serial ports like this one were really common before USB was used. You would plug peripherals into it kind of the same way you use a USB port. Mice were probably the most common use, but you could plug a lot of different things into them.

    • jaybone@lemmy.world
      link
      fedilink
      arrow-up
      4
      ·
      11 months ago

      Of course it is like USB since the S in USB stand for serial; Universal Serial Bus.

      I don’t remember if RS232 was plug and play or hot swap though. I think you might have had to boot with those plugged in. PS/2 I think you could? And of course USB you can. Good times.

      • TerribleTortoise@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        11 months ago

        Yes and no. They could be unplugged and replugged without a reboot. But also you’d have to manually configure the communication parameters of the port. So I hesitate to say “hot swap”.