Shouldn’t the vacuum insulate the glass from the heat of the burning filament?

  • testfactor@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    In addition to the stuff everyone else is saying, most modern bulbs don’t have a vacuum at all.

    Most modern bulbs are filled with an inert gas like argon or xenon. Usually at a lower pressure (around 70% of standard atmospheric pressure), but nowhere near a vacuum.

    This has, while inert to chemical reaction, is more than capable of transferring heat.

  • FiskFisk33@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    edit-2
    1 year ago

    Vacuum means no convection heat. It however does not mean no radiation heat. The filament radiates heat through vacuum the same way the sun does.

    Additionally, theres not vacuum in buldbs, but inert gas, like argon.

  • Archpawn@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    In addition to what others have said, they’re not a vacuum inside. They’re filled with 0.7 atm of argon gas. That would slow the transfer of heat, but there’d still be plenty of heat transfer through convection.

      • curiosityLynx@kglitch.social
        link
        fedilink
        arrow-up
        0
        ·
        1 year ago

        Several reasons. But I would guess a big part is that air pressure drops with altitude. 1atm is the pressure at sea level. According to my google-fu the air pressure on Mt Everest is a mere 0.33 atm.

        You don’t want your light bulb exploding when it breaks, especially if part of the reason you put a special gas in it was to prevent it from imploding when it breaks.

        Now of course most people live significantly closer to sea level than to the peak of Mt Everest, but if a gas is heated in an enclosed space, its pressure rises.

        Also, if you have to choose between shards tending to go inwards or outwards when the bulb shatters, you’d probably prefer them tending to go inwards, provided it’s not so fast they shoot past the middle as they would with a much lower pressure.

        Lastly, it saves on gas.